Product Description
| Product Features | Description |
| Product Models | T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25 |
| Maintenance | Clean internally and replace lubricant after initial use of 2 weeks or 100-200 hours. For long-term use, replace lubricant every half to 1 year or every 1000-2000 hours |
| Lubricant | China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees |
| Product Description | The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries |
| Technical Features | The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities |
| Performance Features | The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CHINAMFG and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force |
| Technical Parameters | Speed ratio range: 1/1, 1.5/1, 2/1, 2.5/1, 3/1, 4/1, 5/1. Torque range: 11.2 – 5713 Nm. Power range: 0.014 – 335 kW |
·Product Models: T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25.
·Maintenance: The gearbox should be cleaned internally and the lubricant should be replaced after the initial use of 2 weeks or 100-200 hours. For long-term use, the lubricant should be replaced every half to 1 year or every 1000-2000 hours.
·Lubricant: The product uses China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees.
·Product Description: The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries.
·Technical Features: The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities.
·Performance Features: The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CHINAMFG and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
|---|
Can pulley gearboxes be customized for specific speed and torque requirements?
Yes, pulley gearboxes can be customized to meet specific speed and torque requirements in various applications. Manufacturers offer flexibility in designing and configuring pulley gearboxes to suit the specific needs of customers. Here’s a detailed explanation of how pulley gearboxes can be customized for specific speed and torque requirements:
Pulley Size and Configuration: The speed and torque output of a pulley gearbox can be adjusted by selecting the appropriate pulley sizes and configurations. The pulley diameter determines the speed ratio between the input and output shafts of the gearbox. By choosing different pulley sizes, the desired speed reduction or increase can be achieved. Additionally, adjusting the number of pulleys and their arrangement (e.g., single, double, or multiple stages) allows for further customization of the speed and torque characteristics of the gearbox.
Material Selection: The choice of materials for pulleys, belts, and other components in the gearbox can influence the torque capacity and durability. Different materials have varying strength and wear resistance properties, allowing manufacturers to select materials that can handle the specific torque requirements of the application. For higher torque applications, materials with greater strength and durability, such as reinforced belts or pulleys made of steel, may be chosen to ensure reliable performance.
Belt Type and Tension: The type of belt used in the pulley gearbox can impact the speed and torque characteristics. Manufacturers offer a range of belt types, such as V-belts, timing belts, or flat belts, each with different performance characteristics. For example, timing belts with toothed profiles provide precise synchronization and are suitable for applications requiring accurate positioning. Manufacturers can select the appropriate belt type and determine the optimal belt tension to achieve the desired speed and torque transfer while maintaining efficient power transmission.
Motor Selection: The motor driving the pulley gearbox plays a crucial role in determining the speed and torque capabilities of the system. Manufacturers consider the motor’s speed-torque curve, power rating, and other specifications to ensure compatibility with the pulley gearbox. By selecting motors with different characteristics, such as high torque at low speeds or high-speed capabilities, manufacturers can customize the overall system to meet specific speed and torque requirements.
Custom Gear Ratio: In some cases, manufacturers may offer the option to customize the gear ratio of the pulley gearbox by incorporating additional gears or pulley stages. This allows for fine-tuning of the speed and torque output to match the specific requirements of the application. By carefully calculating and designing the gear ratios, manufacturers can optimize the gearbox performance for the desired speed and torque range.
Application-Specific Design: Manufacturers may work closely with customers to understand their unique speed and torque requirements in specific applications. This collaboration enables the customization of pulley gearboxes to meet the exact needs of the application. Factors such as load conditions, duty cycles, ambient environment, and other operational considerations are taken into account to ensure the gearbox is designed and configured appropriately for the specific speed and torque requirements.
It is important to note that customized pulley gearboxes may require additional engineering analysis, such as stress calculations, dynamic simulations, or efficiency assessments, to ensure their performance meets the desired specifications. Collaborating with experienced manufacturers or engineering teams can help ensure the successful customization of pulley gearboxes for specific speed and torque requirements.
What maintenance practices are essential for prolonging the lifespan of pulley gearboxes?
Maintaining proper maintenance practices is crucial for prolonging the lifespan and ensuring the reliable operation of pulley gearboxes. Regular maintenance helps prevent premature wear, reduces the risk of breakdowns, and maximizes the efficiency of the gearbox. Here are some essential maintenance practices to consider for prolonging the lifespan of pulley gearboxes:
- Regular Inspection: Conduct regular visual inspections of the pulley gearboxes to identify any signs of wear, damage, or misalignment. Inspect the pulleys, belts or ropes, bearings, and other components for cracks, excessive wear, or loose connections. Detecting and addressing issues early can prevent further damage and extend the lifespan of the gearbox.
- Lubrication: Proper lubrication is vital for the smooth operation and longevity of pulley gearboxes. Follow the manufacturer’s recommendations for lubrication intervals and use the appropriate lubricant. Ensure that all lubrication points, such as bearings and shafts, are adequately lubricated. Regularly check the lubricant levels and replace or replenish the lubricant as needed.
- Belt or Rope Maintenance: If the pulley gearbox utilizes belts or ropes, pay attention to their condition and tension. Inspect the belts or ropes for signs of wear, fraying, or stretching. Adjust the tension according to the manufacturer’s guidelines to prevent slippage and ensure proper power transmission. Replace worn-out or damaged belts or ropes promptly to maintain optimal performance.
- Bearing Maintenance: Bearings play a critical role in the smooth operation of pulley gearboxes. Regularly inspect the bearings for signs of wear, overheating, or noise. Monitor the bearing temperature using appropriate tools and ensure it remains within the manufacturer’s recommended range. Clean the bearings if necessary and replace them when they reach the end of their service life.
- Alignment and Belt Tracking: Check the alignment of the pulleys periodically to ensure they are properly aligned. Misaligned pulleys can lead to increased wear, noise, and reduced efficiency. Adjust the alignment as needed to maintain optimal power transmission. Additionally, verify that the belts or ropes are tracking correctly on the pulleys to prevent unnecessary wear and belt slippage.
- Cleaning: Keep the pulley gearboxes clean and free from dirt, debris, and contaminants. Regularly remove any buildup or foreign particles that may affect the performance or cause damage. Use appropriate cleaning methods and avoid excessive moisture during cleaning to prevent corrosion or other adverse effects on the gearbox components.
- Temperature Monitoring: Monitor the operating temperature of the pulley gearboxes to ensure they remain within the recommended range. Excessive heat can accelerate wear and reduce the lifespan of the gearbox components. Install temperature sensors or use thermal imaging techniques to monitor the temperature and take corrective actions if needed, such as improving cooling or ventilation.
- Record Keeping: Maintain detailed records of maintenance activities, including inspections, lubrication schedules, repairs, and component replacements. This documentation helps track the maintenance history of the pulley gearboxes, identify recurring issues, and plan future maintenance tasks effectively. It also provides valuable information for troubleshooting and warranty claims, if applicable.
Following these maintenance practices and adhering to the manufacturer’s guidelines will help prolong the lifespan of pulley gearboxes. Regular inspections, proper lubrication, belt or rope maintenance, bearing maintenance, alignment checks, cleaning, temperature monitoring, and record keeping contribute to the reliable and efficient operation of the gearboxes over an extended period.
How do pulley gearboxes contribute to power transmission and speed control?
Pulley gearboxes play a significant role in power transmission and speed control in mechanical systems. They offer several advantages that contribute to efficient power transmission and precise speed control. Here’s a detailed explanation of how pulley gearboxes contribute to power transmission and speed control:
- Power Transmission: Pulley gearboxes facilitate power transmission between rotating shafts by utilizing belts or ropes and pulleys. The belts or ropes wrap around the pulleys and create a frictional force that transfers power from the driving pulley (input shaft) to the driven pulley (output shaft). The friction between the belts or ropes and the pulleys ensures efficient power transmission without slippage, allowing for the transfer of rotational force and torque from one shaft to another.
- Speed Conversion: Pulley gearboxes enable speed conversion by utilizing pulleys of different sizes. The size of a pulley is determined by its diameter. When the driving pulley has a smaller diameter than the driven pulley, the rotational speed is increased, but the torque is reduced. Conversely, when the driving pulley has a larger diameter than the driven pulley, the rotational speed is decreased, but the torque is increased. By arranging pulleys of different sizes and connecting them with belts or ropes, pulley gearboxes allow for precise speed control and adaptation to specific operational requirements.
- Adjustability: Pulley gearboxes offer adjustability in power transmission and speed control. The sizes of the pulleys can be easily changed to modify the speed and torque ratios. By selecting pulleys of different diameters, the gear ratio can be adjusted to achieve the desired speed and torque output. This adjustability allows for flexibility in adapting to different load conditions, operational requirements, and system constraints.
- Multiple Pulley Configurations: Pulley gearboxes can be designed with multiple pulleys and belts or ropes to create more complex speed and torque conversion systems. These configurations involve additional intermediate pulleys and idler pulleys to redirect the belt or rope path. By combining pulleys of different sizes and arranging them in various configurations, pulley gearboxes can achieve specific speed and torque ratios, allowing for precise control and optimization of power transmission.
- Efficiency: Pulley gearboxes offer high power transmission efficiency. The use of belts or ropes in the pulley system helps absorb shocks and vibrations, resulting in smoother operation and reduced energy losses. The friction between the belts or ropes and the pulleys ensures efficient power transfer without slippage, enabling maximum power transmission from the driving pulley to the driven pulley.
- Smooth Operation: The combination of belts or ropes and pulleys in pulley gearboxes provides smooth operation. The flexibility and elasticity of the belts or ropes help dampen shocks and vibrations, resulting in reduced noise and improved overall system performance. The smooth operation contributes to enhanced user experience, reduced wear and tear on components, and increased system longevity.
Pulley gearboxes offer a reliable and versatile solution for power transmission and speed control in various mechanical systems. Their ability to efficiently transfer power, provide precise speed control, offer adjustability, and facilitate smooth operation makes them suitable for applications where power transmission and speed conversion are essential, such as conveyor systems, industrial machinery, automotive accessories, exercise machines, and more.
editor by CX 2023-12-20